Siemens SE260 Default Router Login

To get access to your Siemens SE260, you need the IP of your device, the username and password. You'll find such information in the Manual of your Siemens SE260 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Siemens SE260 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Siemens SE260 is user.
    The default password is user.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Siemens SE260 router default login

If above login credentials doesn't work with your Siemens SE260 router then try this method

Try different ID/password combinations that are widely used by Siemens that you'll find below. In this list are the most popular default username and password combinations used by Siemens. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Siemens SE260 wireless router.

# Username Password
1adminadmin
2(blank)admin
3admin(blank)
4(blank)(blank)
5admin
6superuseradmin
73199431994
8loginadmin
9(blank)0000
10(blank)
11SKY_FOX
12(blank)123456
13admin
1422
15254admin
16(blank)SKY_FOX
17Hardcoded passwordBasisk
18useruser
19rootzP2wxY4uE
20642935177
21basiskbasisk
22polltech
23123456
24AdministratorPassword
25WinCCAdmin2WSXcder
26(blank)uboot
27AdministratorAdministrator
28adminBSNL1234
29Level 2 OEM6000
304712
31adminpwp

Default login IPs for my Siemens router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Siemens. Maybe this will work for you.

# Default Router IP
1192.168.254.254
2192.168.2.1
310.0.0.138
4192.168.1.1
5http://speedstream
610.0.0.1
710.0.0.2
810.1.1.1
9192.168.1.254
10192.168.0.1

Nothing of the methods worked for me and I still not get access to my Siemens SE260!

All you need to do is to reset your SE260 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.