10.0.0.1 Default Router IP Login

It's default login IP that is reserved for modems or wireless routers. By typing 10.0.0.1 in the address bar of your browser you will get access to the admin interface of your router. 10.0.0.1 is mostly used by brands like Cisco, Technicolor or Arris . It's not the only standard IP for routers. There are dozens of different IPs like 192.168.1.1, 192.168.0.1 or 192.168.2.1 that were used to access your wireless router, wireless router, cable modem, analog phone gateway or access point control panel. Such a standard IP is also called Default Gateway IP.

Not many people know their router IP because in most cases there is only one situation you need the IP 10.0.0.1. That is while the setup proccess executed by a technician. So you never get in contact with 10.0.0.1. But sometimes you want to change the SSID (WiFi network name), the WiFi-Password or the parental controls. Then you need the IP 10.0.0.1. After logging into your router you'll see the navigation panel where you are able to manage the data traffic, see statistics and configure the router settings.

Where is the login page for 10.0.0.1 ?

10.0.0.1 You simply need to input http://10.0.0.1 in your browser and you will be directed to the login page for your admin panel.

10.0.0.1 login page

If you are not sure of your password or you encounter a wrong match on your password, you can just reset the modem to factory settings.

10.0.0.1 default username password

Resetting the password for 10.0.0.1 ?

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your modem. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings.

10.0.0.1 router reset

What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. If you have not enough information, we recommended that you should get help from someone who has that kind of knowledge.

Default username & password combinations for devices that use 10.0.0.1 as their default IP address

This list will show you the most used default usernames and passwords for the device IP 10.0.0.1.

# Username Password
1adminpassword
2adminadmin
3(blank)public
4useruser
5CiscoCisco
6public
7(blank)(blank)
8cusadminhighspeed
9n/apublic
10(blank)printed on router
11ipbbxipbbx
12(blank)
13admin(blank)
14enduserpassword
15(blank)1234

Router models that use 10.0.0.1 as their default IP

Intelbras NBOX
wireless router
Default username: admin
Default password: admin
Cisco DPC3941
cable modem, wireless router
Default username: admin
Default password: password
Cisco DPC3939
wireless router, cable modem, analog phone gateway
Default username: admin
Default password: password
Proxim ORiNOCO AP-2000
access point
Default username: (blank)
Default password: public
Technicolor TC8717C
wireless router, cable modem, analog phone gateway

Technicolor TC8305C
wireless router, cable modem, analog phone gateway
Default username: admin
Default password: password
Arris TG1682G
wireless router, cable modem, analog phone gateway
Default username: admin
Default password: password
SMC SMCD3GNV3
wireless router, cable modem, analog phone gateway
Default username: cusadmin
Default password: highspeed
SMC SMCD3GNV (Comcast)
wireless router, cable modem, analog phone gateway
Default username: admin
Default password: password
Linksys EA6200
Wireless Router
Default username: admin
Default password: password