10.1.1.1 Default Router IP Login

It's default login IP that is reserved for modems or wireless routers. By typing 10.1.1.1 in the address bar of your browser you will get access to the admin interface of your router. 10.1.1.1 is mostly used by brands like Belkin, D-Link or iiNet . It's not the only standard IP for routers. There are dozens of different IPs like 192.168.1.1, 192.168.0.1 or 192.168.2.1 that were used to access your DSL Router, VoIP Gateway or DSL Modem control panel. Such a standard IP is also called Default Gateway IP.

Not many people know their router IP because in most cases there is only one situation you need the IP 10.1.1.1. That is while the setup proccess executed by a technician. So you never get in contact with 10.1.1.1. But sometimes you want to change the SSID (WiFi network name), the WiFi-Password or the parental controls. Then you need the IP 10.1.1.1. After logging into your router you'll see the navigation panel where you are able to manage the data traffic, see statistics and configure the router settings.

Where is the login page for 10.1.1.1 ?

10.1.1.1 You simply need to input http://10.1.1.1 in your browser and you will be directed to the login page for your admin panel.

10.1.1.1 login page

If you are not sure of your password or you encounter a wrong match on your password, you can just reset the modem to factory settings.

10.1.1.1 default username password

Resetting the password for 10.1.1.1 ?

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your modem. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings.

10.1.1.1 router reset

What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. If you have not enough information, we recommended that you should get help from someone who has that kind of knowledge.

Default username & password combinations for devices that use 10.1.1.1 as their default IP address

This list will show you the most used default usernames and passwords for the device IP 10.1.1.1.

# Username Password
1adminadmin
2(blank)admin
3n/aadmin
4admin(blank)
5admin
6rootadmin
7(blank)Symbol
8(blank)(blank)

Router models that use 10.1.1.1 as their default IP

Symbol AP-4131
access point
Default username: (blank)
Default password: Symbol
D-Link DVA-G3340S
VoIP Gateway
Default username: admin
Default password: admin
D-Link DSL-502T-GenII
DSL Router
Default username: admin
Default password: admin
D-Link DSL-302G
DSL Modem
Default username: admin
Default password: admin
Belkin F5D5730au
DSL Router
Default username: n/a
Default password: admin
Belkin F5D5630au4
DSL Router
Default username: n/a
Default password: admin
Belkin F1PI242ENau
VoIP Gateway
Default username: n/a
Default password: admin
Belkin F1PI242EGau
VoIP Gateway
Default username: n/a
Default password: admin
D-Link DSL-504T
DSL Router
Default username: admin
Default password: admin
Siemens SpeedStream 4200 OptusNet

Default username: admin
Default password: (blank)