Ricoh 4430NF Default Router Login

To get access to your Ricoh 4430NF, you need the IP of your device, the username and password. You'll find such information in the Manual of your Ricoh 4430NF router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Ricoh 4430NF Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 10.226.5.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Ricoh 4430NF is admin.
    The default password is (blank).
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Ricoh 4430NF router default login

If above login credentials doesn't work with your Ricoh 4430NF router then try this method

Try different ID/password combinations that are widely used by Ricoh that you'll find below. In this list are the most popular default username and password combinations used by Ricoh. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Ricoh 4430NF wireless router.

# Username Password
1admin(blank)
2adminpassword
3(blank)password
4adminadmin
5admin
6(blank)(blank)
7(blank)sysadm
8adminno password
9sysadminpassword
10adminsem senha
11(blank)admin
12password
13administratorpassword
14adminodim
15Supervisor(blank)
16(blank)000000
17admin420008
18sisadmpassword

Default login IPs for my Ricoh router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Ricoh. Maybe this will work for you.

# Default Router IP
110.226.5.1
2157.88.149.100
3192.168.126.70
4192.168.1.4
5192.168.1.44
6192.168.0.76
7192.168.0.227
8192.168.0.92
9192.168.1.104

Nothing of the methods worked for me and I still not get access to my Ricoh 4430NF!

All you need to do is to reset your 4430NF modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.