Planex MZK-W04G Default Router Login

To get access to your Planex MZK-W04G, you need the IP of your device, the username and password. You'll find such information in the Manual of your Planex MZK-W04G router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router. The default network name (SSID) is planexuser .

Planex MZK-W04G Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Planex MZK-W04G is admin.
    The default password is password.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Planex MZK-W04G router default login

If above login credentials doesn't work with your Planex MZK-W04G router then try this method

Try different ID/password combinations that are widely used by Planex that you'll find below. In this list are the most popular default username and password combinations used by Planex. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Planex MZK-W04G wireless router.

# Username Password
1adminpassword
2Admin0000
3(blank)0000
40000

Default login IPs for my Planex router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Planex. Maybe this will work for you.

# Default Router IP
1192.168.1.1
2192.168.111.1
3192.168.1.100
4192.168.1.250

Nothing of the methods worked for me and I still not get access to my Planex MZK-W04G!

All you need to do is to reset your MZK-W04G modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.