Netgear WNDAP360 Default Router Login

To get access to your Netgear WNDAP360, you need the IP of your device, the username and password. You'll find such information in the Manual of your Netgear WNDAP360 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router. The default network name (SSID) is NETGEAR_11ng,NETGEAR_11na .

Netgear WNDAP360 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.0.100 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Netgear WNDAP360 is admin.
    The default password is password.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Netgear WNDAP360 router default login

If above login credentials doesn't work with your Netgear WNDAP360 router then try this method

Try different ID/password combinations that are widely used by Netgear that you'll find below. In this list are the most popular default username and password combinations used by Netgear. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Netgear WNDAP360 wireless router.

# Username Password
1adminpassword
2admin1234
3admin
4adminadmin
5password
6comcast1234
7attadmin
8(blank)password
9attadmin
10(blank)admin
11admin(specified by the user)
12(blank)1234
13admin(blank)
14adminchangeme
15adminnetgear1
16n/an/a
17super5777364
18superuserpassword
19(blank)
20mso/adminchangeme/password
21attadmin(blank)
22(blank)printed on router
23vooWPA key on the label, uppercase
24adminsetup
25cusadminhighspeed
26(blank)(blank)
27cusadmin(blank)
28admin(specified by user)
29cktadmin
30superman21241036
31n/apassword
321234

Default login IPs for my Netgear router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Netgear. Maybe this will work for you.

# Default Router IP
1192.168.1.1
2192.168.0.1
3192.168.0.100
4192.168.1.250
5192.168.100.1
6192.168.0.227
7192.168.0.101
8192.168.61.1
9http://www.routerlogin.net
10http://www.mywifiext.net
11192.168.0.233
12192.168.0.239
13192.168.0.230
14192.168.0.228
15192.168.168.168
16192.168.0.224
17www.mywifiext.com
1810.0.0.138
19172.16.0.1
20192.168.0.231
21192.168.1.254
22192.168.0.229
2310.1.10.1
24192.168.1.240
25192.168.0.237
26192.168.0.232
27192.168.0.201
28192.168.10.1
29192.168.0.160
30192.168.0.225
31192.168.1.251
32192.168.0.200
33192.168.15.1
34192.168.254.254
35192.168.58.21
36192.168.1.3
37192.168.0.102
38192.168.0.236
39192.168.0.235
40192.168.0.202
41192.168.0.240
42192.168.0.226
43http://m.home

Manuals for Netgear WNDAP360

Manual
Quick Install Guide

Nothing of the methods worked for me and I still not get access to my Netgear !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.