Linksys WAP11v2.6 Default Router Login

To get access to your Linksys WAP11v2.6, you need the IP of your device, the username and password. You'll find such information in the Manual of your Linksys WAP11v2.6 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Linksys WAP11v2.6 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.1.250 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Linksys WAP11v2.6 is (blank).
    The default password is public.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Linksys WAP11v2.6 router default login

If above login credentials doesn't work with your Linksys WAP11v2.6 router then try this method

Try different ID/password combinations that are widely used by Linksys that you'll find below. In this list are the most popular default username and password combinations used by Linksys. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Linksys WAP11v2.6 wireless router.

# Username Password
1(blank)admin
2adminadmin
3admin
4admin(blank)
5adminpassword
6(blank)public
7comcast1234
8admin
9n/aadmin
10public
11(AA Admin number)4x98
12(blank)(blank)
13user & admin(blank)
14http://192.168.1.246(blank)
15(blank)
16userprimus
17(Linksys Smart Wi-Fi Account)(password for Linksys Smart Wi-Fi Account)
18user & admin
19root(blank)
20http://192.168.1.245Admin
21rootadmin
22(blank)epicrouter
23created in initial setupadmin

Default login IPs for my Linksys router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Linksys. Maybe this will work for you.

# Default Router IP
1192.168.1.1
2192.168.0.1
3192.168.1.245
4192.168.1.254
5192.168.1.250
6192.168.15.1
7192.168.1.226
8192.168.1.252
9192.168.1.240
10192.168.1.251
11169.254.1.250
1210.100.1.1
13192.168.1.246
14192.168.16.1
15192.168.100.1
16192.168.1.225
17192.168.1.99
18192.168.1.200
19192.168.245
20192.168.1.116
21192.168.1.210
22192.168.1.230
23192.168.1.77
24192.168.101.1
25192.168.1.10
26192.168.2.1
2710.0.0.1
28192.168.1.115
29192.168.42.1

Nothing of the methods worked for me and I still not get access to my Linksys WAP11v2.6!

All you need to do is to reset your WAP11v2.6 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.