Intel Wireless AP 2011 2.21 Default Router Login

To get access to your Intel Wireless AP 2011 2.21, you need the IP of your device, the username and password. You'll find such information in the Manual of your Intel Wireless AP 2011 2.21 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Intel Wireless AP 2011 2.21 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Intel Wireless AP 2011 2.21 is (blank).
    The default password is Intel.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Intel Wireless AP 2011 2.21 router default login

If above login credentials doesn't work with your Intel Wireless AP 2011 2.21 router then try this method

Try different ID/password combinations that are widely used by Intel that you'll find below. In this list are the most popular default username and password combinations used by Intel. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Intel Wireless AP 2011 2.21 wireless router.

# Username Password
1adminadmin
2IntelIntel
3(blank)Intel
4admin(blank)
5Guest(blank)
6Intel
7adminhello
8(blank)shiva
9khankahn
10setupsetup
11AdminIntel
12(blank)isolation
13rootadmin
14NICONEXNICONEX

Default login IPs for my Intel router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Intel. Maybe this will work for you.

# Default Router IP
1192.0.2.1
2192.168.0.254
3192.168.0.10

Nothing of the methods worked for me and I still not get access to my Intel Wireless AP 2011 2.21!

All you need to do is to reset your Wireless AP 2011 2.21 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.