D-Link DNS-323 Default Router Login

To get access to your D-Link DNS-323, you need the IP of your device, the username and password. You'll find such information in the Manual of your D-Link DNS-323 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below.

D-Link DNS-323 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.0.32 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your D-Link DNS-323 is admin.
    The default password is blank.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

If above login credentials doesn't work then try this method

Try different ID/password combinations that are widely used by D-Link that you'll find below. In this list are the most popular default username and password combinations used by D-Link. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your wireless router.

# Username Password
1adminblank
2adminadmin
3admin
4blankblank
5blank
6adminpassword
7blankadmin
8useruser
9admin
10admintelus
11blankprivate
12rootadmin
13blankpublic
14adminrandomly generated
15C192.168.0.1
16adminroot
17adminuser
18volcom751987197500
19adminpublic
20886124212421D
21blank0
22administrator@*nigU^D.ha
23blank211cmw91765
24blank(sticker on the bottom of the device)
25D Link 25blank
26D-LinkD-Link
27admin<blank>
28admin(configured in setup)
29adminyear2000
30blank(see notes)

Default login IPs for my D-Link router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer D-Link. Maybe this will work for you.

# Default Router IP
1192.168.0.1
2192.168.0.50
3192.168.1.1
4192.168.8.254
5192.168.0.30
6192.168.10.1
710.90.90.91
810.1.1.1
9192.168.0.20
10192.168.15.1
1110.90.90.90
12192.168.0.35
13192.168.0.40
14192.168.1.254
15192.168.0.101
16192.168.0.50:2000
17192.168.0.10
18192.168.1.
19http://acquired via DHCP
20193.168.1.150
21192.160.0.50
22acquired via DHCP
23192.168.229.61
24192.168.0.32
25192.168.0.100
2610.255.255.1
27192.168.2.1
28192.168.0.60

Nothing of the methods worked for me and I still not get access to my D-Link DNS-323!

All you need to do is to reset your DNS-323 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.