D-Link DIR-600 rev C2 Default Router Login

To get access to your D-Link DIR-600 rev C2, you need the IP of your device, the username and password. You'll find such information in the Manual of your D-Link DIR-600 rev C2 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

D-Link DIR-600 rev C2 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
  • You should see 2 text fields where you can enter a username and a password.
  • Check the bottom of your router. There you will find your login credentials. If not then have a look at the manual of your router.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

D-Link DIR-600 rev C2 router default login

If above login credentials doesn't work with your D-Link DIR-600 rev C2 router then try this method

Try different ID/password combinations that are widely used by D-Link that you'll find below. In this list are the most popular default username and password combinations used by D-Link. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your D-Link DIR-600 rev C2 wireless router.

# Username Password
1admin(blank)
2admin
3adminadmin
4(blank)(blank)
5adminpassword
6(blank)
7n/an/a
8(blank)admin
9n/a(blank)
10admin
11useruser
12admintelus
13(blank)private
14admin<blank>
15rootadmin
16adminroot
17adminrandomly generated
18Admin 'blank'
19(blank)public
20admin 'randomly generated'
21C192.168.0.1
22D-LinkD-Link
23admin(configured in setup)
24adminyear2000
25(blank)(see notes)
26public
27(label on the bottom of the router)
28(blank)(sticker on the bottom of the device)
29volcom751987197500
30n/aadmin
31adminpublic
32886124212421D
33(blank)0
34adminn/a
35administrator@*nigU^D.ha
36(blank)211cmw91765
37adminnone
38D Link 25(blank)
39adminuser

Default login IPs for my D-Link router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer D-Link. Maybe this will work for you.

# Default Router IP
1192.168.0.1
2192.168.0.50
3192.168.1.1
4192.168.0.30
5192.168.8.254
6192.168.10.1
710.90.90.91
810.1.1.1
9192.168.0.20
1010.90.90.90
11192.168.15.1
12192.168.0.35
13192.168.0.40
14192.168.0.32
15192.168.0.10
16acquired via DHCP
17192.168.1.254
18192.168.0.101
19192.168.0.50:2000
20192.168.0.100
21193.168.1.150
22192.160.0.50
23192.168.2.1
24192.168.0.60
25192.168.1.
2610.255.255.1
27192.168.229.61

Manuals for D-Link DIR-600 rev C2

Manual

Nothing of the methods worked for me and I still not get access to my D-Link !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.