Cisco WAP200E Default Router Login

To get access to your Cisco WAP200E, you need the IP of your device, the username and password. You'll find such information in the Manual of your Cisco WAP200E router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Cisco WAP200E Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.1.245 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Cisco WAP200E is admin.
    The default password is admin.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Cisco WAP200E router default login

If above login credentials doesn't work with your Cisco WAP200E router then try this method

Try different ID/password combinations that are widely used by Cisco that you'll find below. In this list are the most popular default username and password combinations used by Cisco. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Cisco WAP200E wireless router.

# Username Password
1CiscoCisco
2adminadmin
3(blank)(blank)
4adminpassword
5admin(blank)
6(blank)Cisco
7adminchangeme
8rootattack
9(blank)riverhead
10(blank)
11sa(blank)
12ATTadmin401!VEN
13bbsd-clientchangeme2
14cusadminhighspeed
15admincisco
16user(blank)
17Administratorchangeme
18admin1PTV-ADM1N
19bbsd-clientNULL
20Administratoradmin
21(blank)admin
22netrangrattack
23n/a(blank)
24(blank)public/private/secret
25superusersuperuser
26c
27ILMI
28adminsystem
29hsahsadb
30rootblender
31(blank)_Cisco
32adminW2402
33rootsecur4u
34(blank)W2402
35cmaker
36EAdmin<systemid>(blank)
37prixadminprixadmin
38Admin123Admin123
39uwmadminpassword
40admindiamond
41cusadmincusadmin
42End User7936
43cable-docsis
44admin
45admintsunami
46(blank)233897301
47(blank)changeit
48admindefault
49bubba(unk)
50cmakercmaker
51admintelstra

Default login IPs for my Cisco router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Cisco. Maybe this will work for you.

# Default Router IP
1192.168.1.1
2192.168.0.1
310.10.10.1
410.0.0.1
5192.168.1.245
6192.168.100.1
7192.168.1.254
8192.168.15.1
9acquired via DHCP
10192.168.75.1/setup
11192.168.1.115
1210.1.10.1
13192.168.0.0
14192.168.10.10
1510.128.128.128
1610.0.0.2

Manuals for Cisco WAP200E

Manual

Nothing of the methods worked for me and I still not get access to my Cisco !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.