CISCO CONTENT ENGINE Default Router Login

To get access to your CISCO CONTENT ENGINE, you need the IP of your device, the username and password. You'll find such information in the Manual of your CISCO CONTENT ENGINE router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

CISCO CONTENT ENGINE Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your CISCO CONTENT ENGINE is admin.
    The default password is default.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

CISCO CONTENT ENGINE router default login

If above login credentials doesn't work with your CISCO CONTENT ENGINE router then try this method

Try different ID/password combinations that are widely used by CISCO that you'll find below. In this list are the most popular default username and password combinations used by CISCO. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your CISCO CONTENT ENGINE wireless router.

# Username Password
1CiscoCisco
2adminadmin
3(blank)(blank)
4adminpassword
5admin(blank)
6(blank)Cisco
7adminchangeme
8rootattack
9cusadminhighspeed
10admincisco
11user(blank)
12Administratorchangeme
13admin1PTV-ADM1N
14bbsd-clientNULL
15Administratoradmin
16(blank)admin
17(blank)riverhead
18(blank)
19sa(blank)
20ATTadmin401!VEN
21bbsd-clientchangeme2
22adminsystem
23hsahsadb
24(blank)_Cisco
25rootblender
26adminW2402
27(blank)W2402
28rootsecur4u
29cmaker
30EAdmin<systemid>(blank)
31Admin123Admin123
32prixadminprixadmin
33uwmadminpassword
34admindiamond
35cusadmincusadmin
36End User7936
37cable-docsis
38admintsunami
39admin
40(blank)233897301
41(blank)changeit
42admindefault
43bubba(unk)
44cmakercmaker
45admintelstra
46n/a(blank)
47netrangrattack
48(blank)public/private/secret
49superusersuperuser
50c
51ILMI

Default login IPs for my CISCO router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer CISCO. Maybe this will work for you.

# Default Router IP
1192.168.1.1
2192.168.0.1
310.10.10.1
410.0.0.1
5192.168.1.245
6192.168.100.1
7192.168.1.254
8192.168.15.1
9acquired via DHCP
10192.168.1.115
1110.1.10.1
12192.168.0.0
13192.168.10.10
1410.128.128.128
1510.0.0.2
16192.168.75.1/setup

Nothing of the methods worked for me and I still not get access to my CISCO CONTENT ENGINE!

All you need to do is to reset your CONTENT ENGINE modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.