Alcatel OmniPCX 4.1 and above Default Router Login

To get access to your Alcatel OmniPCX 4.1 and above, you need the IP of your device, the username and password. You'll find such information in the Manual of your Alcatel OmniPCX 4.1 and above router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below.

Alcatel OmniPCX 4.1 and above Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
  • You should see 2 text fields where you can enter a username and a password.
  • Check the bottom of your router. There you will find your login credentials. If not then have a look at the manual of your router.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

If above login credentials doesn't work then try this method

Try different ID/password combinations that are widely used by Alcatel that you'll find below. In this list are the most popular default username and password combinations used by Alcatel. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your wireless router.

# Username Password
1adminadmin
2Administratorblank
3blankblank
4rootpermit
5adminswitch
6blankadmin
7ftp_admikilo1987
81515
9blank0000
10adfexcadfexc
11administrator784518
12Admin23698
13installerpbxk1064
14diagswitch
15ftp_instpbxk1064
161064
17adminblank
18mtclblank
19(no default)(no default)
20kermitkermit

Default login IPs for my Alcatel router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Alcatel. Maybe this will work for you.

# Default Router IP
1192.168.1.254
210.0.0.138
3192.168.1.1
410.1.24.88

Nothing of the methods worked for me and I still not get access to my Alcatel OmniPCX 4.1 and above!

All you need to do is to reset your OmniPCX 4.1 and above modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.