Actiontec T3200 Default Router Login

To get access to your Actiontec T3200, you need the IP of your device, the username and password. You'll find such information in the Manual of your Actiontec T3200 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Actiontec T3200 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.254.254 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Actiontec T3200 is admin.
    The default password is (label on the bottom of the device).
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Actiontec T3200 router default login

If above login credentials doesn't work then try this method

Try different ID/password combinations that are widely used by Actiontec that you'll find below. In this list are the most popular default username and password combinations used by Actiontec. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your wireless router.

# Username Password
1adminpassword
2admin(blank)
3AdminAdmin
4(blank)(blank)
5admin
6admintelus
7adminrandomly generated
8adminprinted on router
9admin 'randomly generated'
10adminfound on router label
11adminserial number of device
12adminprinted on bottom of router
13adminprinted on the label located on the bottom of the
14n/a(blank)
15admin(label on the bottom of the device)
16adminPrinted on Routers Label
17found on router labelfound on router label
18adminprinted on router label
19admin(sticker on the back of the gateway)
20adminn/a

Default login IPs for my Actiontec router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Actiontec. Maybe this will work for you.

# Default Router IP
1192.168.0.1
2192.168.1.1
3192.168.1.254
4192.168.254.254
5192.168.99.254
6192.168.2.1
7192.168.8.1
8192.168.0.2
9192.168.10.1
1010.0.0.138
11192.168.178.1
12192.168.0.250
13192.168.1.240

Nothing of the methods worked for me and I still not get access to my Actiontec T3200!

All you need to do is to reset your T3200 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.