Actiontec SBT100U Default Router Login

To get access to your Actiontec SBT100U, you need the IP of your device, the username and password. You'll find such information in the Manual of your Actiontec SBT100U router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Actiontec SBT100U Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
  • You should see 2 text fields where you can enter a username and a password.
  • Check the bottom of your router. There you will find your login credentials. If not then have a look at the manual of your router.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Actiontec SBT100U router default login

If above login credentials doesn't work with your Actiontec SBT100U router then try this method

Try different ID/password combinations that are widely used by Actiontec that you'll find below. In this list are the most popular default username and password combinations used by Actiontec. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Actiontec SBT100U wireless router.

# Username Password
1adminpassword
2admin(blank)
3AdminAdmin
4(blank)(blank)
5admin
6admintelus
7adminrandomly generated
8adminprinted on router
9admin 'randomly generated'
10adminserial number of device
11adminfound on router label
12adminPrinted on Routers Label
13found on router labelfound on router label
14adminprinted on router label
15admin(sticker on the back of the gateway)
16adminn/a
17adminprinted on bottom of router
18adminprinted on the label located on the bottom of the
19n/a(blank)
20admin(label on the bottom of the device)

Default login IPs for my Actiontec router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Actiontec. Maybe this will work for you.

# Default Router IP
1192.168.0.1
2192.168.1.1
3192.168.1.254
4192.168.99.254
5192.168.2.1
6192.168.254.254
7192.168.10.1
810.0.0.138
9192.168.178.1
10192.168.0.250
11192.168.1.240
12192.168.8.1
13192.168.0.2

Manuals for Actiontec SBT100U

Manual

Nothing of the methods worked for me and I still not get access to my Actiontec !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.