3Com SuperStack II Netbuilder 11.1 Default Router Login

To get access to your 3Com SuperStack II Netbuilder 11.1, you need the IP of your device, the username and password. You'll find such information in the Manual of your 3Com SuperStack II Netbuilder 11.1 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

3Com SuperStack II Netbuilder 11.1 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
  • You should see 2 text fields where you can enter a username and a password.
  • Check the bottom of your router. There you will find your login credentials. If not then have a look at the manual of your router.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

3Com SuperStack II Netbuilder 11.1 router default login

If above login credentials doesn't work with your 3Com SuperStack II Netbuilder 11.1 router then try this method

Try different ID/password combinations that are widely used by 3Com that you'll find below. In this list are the most popular default username and password combinations used by 3Com. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your 3Com SuperStack II Netbuilder 11.1 wireless router.

# Username Password
1(blank)admin
2admin
3admin(blank)
4debugsynnet
5adminadmin
6n/aadmin
7adminpassword
8(blank)
9techtech
10root!root
11securitysecurity
12adm(blank)
13managermanager
14UserPassword
153comcsoRIP000
16(blank)(blank)
17(blank)1234admin
18(blank)comcomcom
19Type User: FORCE(blank)
20adminttdadminttd
21administrator0
22administeradminister
23comcomcom
24Admin3com
25DOCSIS_APP3com
26Administratoradmin
27recoveryrecovery
28PASSWORD
29(blank)1234
30(blank)PASSWORD
31admin1234
32debugtech
33admincomcomcom
34recoverrecover

Default login IPs for my 3Com router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer 3Com. Maybe this will work for you.

# Default Router IP
1192.168.1.1
2169.254.2.2
3192.168.1.250
4192.168.2.1
5192.168.0.1
6192.168.200.254
7192.168.0.50
8169.254.2.1

Nothing of the methods worked for me and I still not get access to my 3Com SuperStack II Netbuilder 11.1!

All you need to do is to reset your SuperStack II Netbuilder 11.1 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.