How To Interconnect The Routers – An Easy Guide

Interconnection of networks helps to expand your horizon when vast information has to be accessed. Making networks large enough at one end can be a bad choice technically because of many security threats involved. As an alternative to this setting, the interconnection router seems to be the best choice available.

Connect a router to another to expand a network and see the security pouring in and besides that, it is always easy to connect preexisting networks together instead of expanding the existing networks that you have.

HOW TO CONNECT THE ROUTERS TOGETHER?

While going to router interconnection check the steps below to ensure that process is easier and convenient and no technical glitches come up during the setup. Router interconnection is set up by the following considerations:

Identify the set of router you will connect together, have one system to configure the routers, one Ethernet cable, extra power outlets

To set the first router, connect it to the computer through the Ethernet cable, turn on the modem and open the web browser and go to the admin panel and enable the DHCP on router 1. Test this network and disconnect afterward to check if the router is working properly.

For router 2, follow the above procedure and disable DHCP and assign a new IP address to it, set the name of router 2 and pass the key to router 1.

These steps complete the procedure of router setting and after these settings are managed, start with the network. In reality, when you try to get the Netgear Router Login, the modem and the wifi routers should be in the same configuration settings.

SETTING UP NETWORK AFTER ROUTER INTERCONNECTION

Network set up is easier and you need to restart router 2 and connect it to router 1 through the Ethernet cable. When the first router is receiving internet connection after setting modem on, router 2 will also receive the signals, which indicate network interconnection through routers.

Now, comes the turn to connect devices with respective routers through wireless or Ethernet cable. The choice is yours but ensure that everything turns out to be quite correct so that least chances of technical faults are there.

CONSIDERATION TO MAKE ROUTER INTERCONNECTION EASIER

You have to keep in mind some factors which help to make this interconnection easier and better. Avoid the chances of incorrect settings as in that case computers will not get connected with the routers which may cause other types of delays. After you have set up routers, make sure you note down IP addresses of all the devices such as modem and computers which are connected to the network.

In case, the routers get disconnected, you need to reconfigure it and set the static IP address of the device. You may also use the DHCP switch of the device so that interconnection process is easier.

Owing to the benefits of router interconnection, many firms are adopting this interconnection technique in order to gain better performance and speedy data transfer in a cost-effective method. So, this is how things are made easier through router interconnection which eventually enhances the scope of benefits gained from routers.