Sitecom WL-303 Default Router Login

To get access to your Sitecom WL-303, you need the IP of your device, the username and password. You'll find such information in the Manual of your Sitecom WL-303 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Sitecom WL-303 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.0.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Sitecom WL-303 is admin.
    The default password is admin.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Sitecom WL-303 router default login

If above login credentials doesn't work with your Sitecom WL-303 router then try this method

Try different ID/password combinations that are widely used by Sitecom that you'll find below. In this list are the most popular default username and password combinations used by Sitecom. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Sitecom WL-303 wireless router.

# Username Password
1adminadmin
2admin(blank)
3(blank)(blank)
4admin(sticker on bottom of unit)
5admin(label on the bottom of the router)
6adminpassword
7adminrandomly generated
8admin 'randomly generated'
9admin(sticker on the back of the access point)
10admin
11admin(label on the bottom of device)
12admin(sticker on the bottom of the device)
13sitecomsitecom
14(blank)damin
15(blank)admin
16(blank)located on label/bottom of router
17admimadmin
18(blank)sitecom
19adminPrinted on Routers Label

Default login IPs for my Sitecom router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Sitecom. Maybe this will work for you.

# Default Router IP
1192.168.0.1
2192.168.0.234
3192.168.128.253
410.0.0.1
5192.168.1.250
6192.168.1.254

Manuals for Sitecom WL-303

Manual

Nothing of the methods worked for me and I still not get access to my Sitecom !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.