Dlink DSL-2540U Default Router Login

To get access to your Dlink DSL-2540U, you need the IP of your device, the username and password. You'll find such information in the Manual of your Dlink DSL-2540U router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Dlink DSL-2540U Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Dlink DSL-2540U is admin.
    The default password is admin.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Dlink DSL-2540U router default login

If above login credentials doesn't work with your Dlink DSL-2540U router then try this method

Try different ID/password combinations that are widely used by Dlink that you'll find below. In this list are the most popular default username and password combinations used by Dlink. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Dlink DSL-2540U wireless router.

# Username Password
1admin(blank)
2adminadmin
3(blank)(blank)
4(blank)admin
5adminpassword
6admin1234
7create in initial setupcreate in initial setup
8(blank)created in initial setup
9adminroot
10useruser
11Adminleave blank
12adminrefer to router label
13admintelus
14root(blank)
15ipbbxipbbx
16adminSame as network key or WIFI key. Can be found on a

Default login IPs for my Dlink router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Dlink. Maybe this will work for you.

# Default Router IP
1192.168.0.1
2192.168.1.1
3192.168.0.50
4192.168.0.99
5192.168.0.20
6192.168.0.30
7192.168.0.10
8192.168.0.32
9192.168.15.1
1010.90.90.90
11192.168.0.35
12192.168.0.40
1310.0.0.1
14192.168.0.101
15192.168.98.170
1610.0.0.2
1710.1.1.1
1810.1.1.3
19192.168.229.61
20192.168.100.1
21unknown
22192.168.254.254
23192.168.1.254
24192.168.11.1

Nothing of the methods worked for me and I still not get access to my Dlink DSL-2540U!

All you need to do is to reset your DSL-2540U modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.