Cisco WAP2000 Default Router Login

To get access to your Cisco WAP2000, you need the IP of your device, the username and password. You'll find such information in the Manual of your Cisco WAP2000 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below.

Cisco WAP2000 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.1.245 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your Cisco WAP2000 is admin.
    The default password is admin.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

If above login credentials doesn't work then try this method

Try different ID/password combinations that are widely used by Cisco that you'll find below. In this list are the most popular default username and password combinations used by Cisco. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your wireless router.

# Username Password
1CiscoCisco
2adminadmin
3blankblank
4adminpassword
5adminblank
6blankCisco
7adminchangeme
8blank
9rootattack
10cusadminhighspeed
11admincisco
12Administratorchangeme
13bbsd-clientNULL
14Administratoradmin
15blankadmin
16blankriverhead
17userblank
18sablank
19bbsd-clientchangeme2
20adminsystem
21hsahsadb
22blank_Cisco
23rootblender
24adminW2402
25blankW2402
26rootsecur4u
27cmaker
28EAdmin<systemid>blank
29Admin123Admin123
30prixadminprixadmin
31uwmadminpassword
32admindiamond
33ATTadmin401!VEN
34End User7936
35cable-docsis
36admintsunami
37blank233897301
38blankchangeit
39admindefault
40bubba(unk)
41cmakercmaker
42admintelstra
43netrangrattack
44blankpublic/private/secret
45cusadmincusadmin
46superusersuperuser
47admin1PTV-ADM1N
48c
49ILMI

Default login IPs for my Cisco router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Cisco. Maybe this will work for you.

# Default Router IP
1192.168.1.1
2192.168.0.1
310.10.10.1
410.0.0.1
5192.168.1.245
6192.168.100.1
7192.168.1.254
8192.168.15.1
910.128.128.128
10acquired via DHCP
1110.0.0.2
12192.168.75.1/setup
13192.168.1.115
1410.1.10.1
15192.168.0.0
16192.168.10.10

Manuals for Cisco WAP2000

Manual

Nothing of the methods worked for me and I still not get access to my Cisco !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.