Actiontec WCB3000 Default Router Login

To get access to your Actiontec WCB3000, you need the IP of your device, the username and password. You'll find such information in the Manual of your Actiontec WCB3000 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Actiontec WCB3000 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
  • You should see 2 text fields where you can enter a username and a password.
  • Check the bottom of your router. There you will find your login credentials. If not then have a look at the manual of your router.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Actiontec WCB3000 router default login

If above login credentials doesn't work with your Actiontec WCB3000 router then try this method

Try different ID/password combinations that are widely used by Actiontec that you'll find below. In this list are the most popular default username and password combinations used by Actiontec. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Actiontec WCB3000 wireless router.

# Username Password
1adminpassword
2admin(blank)
3AdminAdmin
4(blank)(blank)
5admin
6admintelus
7adminprinted on router
8admin 'randomly generated'
9adminrandomly generated
10adminfound on router label
11adminserial number of device
12admin(sticker on the back of the gateway)
13adminn/a
14adminprinted on bottom of router
15adminprinted on the label located on the bottom of the
16n/a(blank)
17admin(label on the bottom of the device)
18adminPrinted on Routers Label
19found on router labelfound on router label
20adminprinted on router label

Default login IPs for my Actiontec router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Actiontec. Maybe this will work for you.

# Default Router IP
1192.168.0.1
2192.168.1.1
3192.168.1.254
4192.168.99.254
5192.168.2.1
6192.168.254.254
710.0.0.138
8192.168.178.1
9192.168.0.250
10192.168.1.240
11192.168.8.1
12192.168.0.2
13192.168.10.1

Manuals for Actiontec WCB3000

Manual

Nothing of the methods worked for me and I still not get access to my Actiontec !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.